Replacing The Light Bulb; Technical Characteristics; Displays - Küppersbusch CDK6300.0 Bedienungsanleitung


There is a vib
flashing and no functions work: The
removal of residual liquids was interrupted,
and the pump is now running dry. Let the
process finish and the oven should be
ready to use.

The appliance still makes a noise after the
cooking process is finished! This is not a
problem.
- The cooling fan keeps on working for some
time. When the temperature has dropped
sufficiently, the fan will switch itself off.

The oven switches on but the interior light
does not go on!
- If all the functions work properly it is
probable that the lamp has blown. You can
keep on using the oven.

Replacing the light bulb

To replace the light bulb, proceed as follows:
- Disconnect the oven from the power
supply. Take the plug out of the socket or

Displays

Display
SOFT
MED
HARD
/ CAL
0,5L
1,0 L
RES
dEP
-LO-
-
-
-
-
-
Descaling
Soft water.
Medium water.
Hard water.
Appliance must be descaled.
Flashing descaling starts.
Feed 0,5l descaling solution into the water tank.
Feed 1l cold water into the water tank for rinsing.
Water tank
Indication that water tank is missing.
The water tank must be removed, emptied and reinserted.
Tank is empty, please fill with 0,5l of water.
Unscrew and remove the glass light cover.
Remove the light bulb. Warning! The bulb
may be very hot.
Fit a new G9 230V / 25W halogen bulb.
instructions.
Screw the glass light cover into place.
Connect the oven again to the power
supply.
Description
english
53