Maintenance And Care - Reely SKY Piper J3 Cub RtF Bedienungsanleitung


18.

Maintenance and Care

Regularly check the functional safety of your remote control and smooth running of the gear motor. All moving parts
have to be easily movable but there should not be a clearance in the bearing.
Clean the exterior of the model and the remote control only with a soft, dry cloth or brush. Never use aggressive
cleansing agents or chemical solvents, since this might damage the surfaces.
Important!
If you have to replace any damaged or worn parts, only use original replacement parts.
The spare parts list is located on our website www.conrad.com in the download section to the respective product.
You can also order the replacement parts list by phone. For contact information, please refer to chapter „1. Introduction"
at the beginning of these operating instructions.
Propeller change
Proceed as follows to replace a damaged propeller:
• Hold the propeller shaft with small long-nosed pliers.
• Turn the propeller manually counter-clockwise (from
the front) and screw the propeller from the shaft.
• Apply the included replacement propeller and tighten
it clockwise (from the front).
56
Figure 20