Datalogic F732 WIZARD Bedienungsanleitung Seite 215

4
By selecting a column heading (Device, State, Information) the list is alphabetically
reordered.
Device
Indicates the device name.
State
Indicates the operating status between device and the host computer.
Possible messages are:
Connected
Not connected
Busy
Error
Information
Indicates the specific type of terminal or satellite configured and the version of the
firmware.
30
indicates that the satellite is connected and operating, or
that the terminal is inserted in the cradle.
indicates that the satellite is either disconnected from the
network or cut off from the power source, or that the
terminal is not inserted in its own cradle.
indicates that the device and the host computer are
exchanging data.
indicates a malfunction.
Check the device's physical connections and retry. If the
error message persists, contact the Datalogic technical
assistance service or the supplier.
begins transmission with all the devices on which polling
has been enabled (downloading of data onto the host
computer). To activate the polling of one device, see par.
4.2.1 under "Terminal
Properties".
allows you to end transmission between host computer and
devices, which has been previously started by pressing the
Start button.
supplies information on the configuration values for the
terminals selected as well as permitting the date and time
to be programmed.
SYSTOOLS™2001
Properties" and "Satellite