Duravit SensoWash Starck Bedienungsanleitung Seite 63

The shower force is
too weak.
The temperature of
the shower water is
not warm enough.
The water spray
from the spray
wand suddenly
stops.
The shower water quantity
has been set to "Low".
The fine sieve on the water
supply is blocked.
The connection nut on the
hose of the water supply
is loose, allowing water to
escape.
The water temperature has
been set to "Off" or "Low".
After an uninterrupted
showering process of more
than 5 minutes, the water
spray stops.
If the seat position changes
too much during use, the
seat sensor no longer
detects the human body
correctly.
> On the remote control, press
the "Shower water quantity"
option in order to adjust the
water quantity.
> Clean the fine filter.
(see chapter 7)
> Tighten the connection nut.
> On the remote control, press
the "Water temperature"
option in order to adjust the
water temperature.
> This is normal.
> Sit down again and press the
Rearwash/Ladywash button
once again.
EN
63