-
check if appropriate hose supplying the cleaning agent has been correctly
connected and introduced to the container with appropriate cleaning agent;
-
start the device with
D1
D3
D4
T 15
T1
button.
o At the same time press T15 button (Clean)
and knob
o The digital display
type. By turning knob
T 1
the required program SOFT (delicate),
NORMAL (medium) or STARK (intensive),
depending on the device chamber
contamination level.
o After selecting the appropriate program press
T16
begins. Cleaning begins only when the
door is closed.
o During cleaning the digital display
the following messages:
o Before new baking cycle rinse the device
chamber manually with use of hand shower.
It removes residuals of the cleaning agent.
o Install the drain filter in the chamber
T 16
bottom.
M
M
.
D3
shows the cleaning
M
button (Start). The automatic cleaning
Initial cleaning - cleaning
Rinsing
Drying
Cleaning finished
it is possible to select
D3
shows
- 83 -