VOLTCRAFT T6200 Bedienungsanleitung Seite 57

• Depending on which rechargeable battery type is set, the
charge display in the lower area of the display can show
additional information as well.
• The input field „BATTERY METER" is displayed at the lower
left for NiCd, NiMH and Pb rechargeable batteries.
When you touch this field, the display will switch to detail
display. The internal resistance of the rechargeable battery
„Batt Res." and the charged or discharged capacity value
„CAPACITY" are displayed.
• The input field „ENTER" switches back to the charge display.
• For lithium rechargeable batteries, the input field „BALANCE
STATUS" (see figure 14) is displayed on the lower left. When
you touch this field, the display will switch to detail display. In
addition to the interior resistance of the rechargeable battery,
„Batt Res.", and the capacity value „CAPACITY", the voltages
of the individual cells of the battery pack „CELL1 ... CELL6"
and the associated bar charts are displayed here.
• Touch the button „ENTER" to return to the start display.
• If you touch the button „GRAPH" in the charge display, you
will see the voltage curve of the charge/discharge curve in
the display.
For a well-structured display of the curve, the time axis (T) is
automatically updated continually.
Additionally, the time for charging/discharging and the total
voltage of the rechargeable batteries/battery packs are
displayed below the chart.
• Touch the button „ENTER" to return to the charge display.
56
Figure 14
Figure 15