Technical Data; Safety Instructions; General - Maico DAS 71 Series Montage- Und Betriebsanleitung

5. Technical data

For technical data, refer to the rating plate.
Degree of protection
Air volume
Weight
Information
● Rating plate  Fan,  Envelope to these
instructions.
● Dimensions and characteristic curves
 Catalogue,  Internet.
● Internet  maico-ventilatoren.com

6. Safety instructions

6.1 General

● Read these operating
instructions carefully before
mounting and commissioning.
● Assembly, electrical
connection and repairs may
only be undertaken by
electricians in accordance
with Chapter 2.
● The installation staff must be
sure-footed and comfortable
working at height.
● The degree of protection
stated on the rating plate is
only guaranteed if installation
is undertaken correctly and if
the cables are correctly
guided into the terminal box.
IP 55
10,800 to 72,000 m³/h,
depending on unit
variant
39 to 192 kg, depen-
ding on unit variant
● Only connect unit to perma-
nently wired electrical install-
lations with NYM-O or NYM-J,
cables (5 x 1.5...4 mm²
depending on unit type and
cable laying method).
Additionally, a mains isolation
device with contact openings
of at least 3 mm at each pole
must be installed.
● The unit may only be
operated using the voltage
and frequency shown on the
rating plate.
● Only operate the unit when it
is completely installed.
● Ensure that foreign bodies
cannot be sucked into the
unit and air channel.
● Never operate the device
without a protective grille
with a free inlet.
● Ensure a sufficient fresh air
supply intake.
● Modifications and alterations
to the unit are not permitted
and release the manufacturer
from any guarantee and
liability.
5. Technical data │ uk
15