Introduction; Intended Use; Product Description - Reely EXTRA 300 Bedienungsanleitung



1. Introduction

Dear Customer,
Thank you for purchasing this product.
This product meets the requirements of current statutory, European and national guidelines.
These operating instructions relate to this product. They contain important notices on commissioning and handling. Please take this
into consideration when you pass the product on to third parties.
Please keep these instructions for further reference!
All company names and product designations contained herein are trademarks of the respective owners. All rights reserved.
In case of any technical inquiries, contact or consult:

Tel. no.: +49 9604 / 40 88 80
Fax. no.: +49 9604 / 40 88 48
E-mail: tkb@conrad.de
Mon. to Thur. 8.00am to 4.30pm
Fri. 8.00am to 2.00pm


2. Intended use

This product is an electrically driven model airplane which is radio controlled wireless via the remote control system to be separately purchased. The model is
designed for outdoor use and should be flown under weak winds or in calm weather conditions only.
The product must not get damp or wet.
The product is not a toy and should be kept out of reach of children under 14 years of age!
Take note of all the safety notes in these operating instructions! They contain important information regarding the handling of the product.
You are solely responsible for the safe operation of the model!


3. Product Description

The „EXTRA 300" model airplane is capable of aerobatic flight, and may only be operated by experienced model airplane pilots. Its assembly and later operation
requires extensive knowledge in the handling of model airplanes.
The extremely agile model is absolutely NOT suited for beginners!
The fuselage halves, wings and landing gear consist of precisely dimensioned foamed plastic parts manufactured in special moulds.
Besides the already mentioned main components, delivery also includes the landing gear, a spinner, all parts required for rudder control, a brushless motor with
control and three micro servos.
A multi-coloured decal sheet is also enclosed for decoration purposes.
The controllable features are: Aileron, elevator and rudder as well as the speed control of the motor.
31