Changing The Ip Address Settings; Quick Install For Network - Ricoh SP 210 Installationsanleitung

Press [Yes] in the confirmation screen.
Check the IP address on the configuration page.
The address appears under Network Settings.
If the IPv4 address is not automatically assigned by the DHCP server, the machine automatically selects
an unused IPv4 address starting with "169.254.xxx.xxx" (Auto IP function).

Changing the IP Address Settings

To configure the IP address manually, it is necessary to specify the IP address‑related settings. For details,
see page 19 "3.Appendix".
SP 212w/SP 212Nw/SP 213w/SP 213Nw
‹
Use Smart Organizing Monitor to connect the machine to the network. Install Smart Organizing Monitor
first on a computer on the same network.
For details, see "Installing the Driver and Software", User Guide .
SP 212SUw/SP 212SNw/SP 212SFw/SP 212SFNw/
‹
SP 213SUw/SP 213SNw/SP 213SFw/SP 213SFNw
Configure network settings using the control panel.

Quick Install for Network

Turn on the power of the computer.
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
Select a language and product for the interface, and then click [OK].
DCT059
CXP066
16