Configuring Your Printer - Belkin F8T030 Benutzerhandbuch

abc-3 4:24:2003 0:53
Note: You must add a printer, as a Local Printer (NOT a Network Printer), and select
the port "Belkin" as its port.
1. Go to the Control Panel and open the "Printers" folder.
2. Select the printer that is connected to the AP.
3. Select "File" then "Properties" from the menu.
(You may also right-click on the printer and select
"Properties").
4. Under the Ports tab, you will see a list of ports
that are installed on your computer. Highlight the
port named "Belkin" and click on "Configure Port".
Page 47
C O N F I G U R I N G Y O U R P R I N T E R
47