Abbreviations Used / Terminology - TR-Electronic LE-200 Anleitung

1.3 Abbreviations used / Terminology

CAN
CIP™
DHCP
DNS
EDS
EMC
Gateway
Half-Duplex
IGMP
LE-200
MAC-ID
Multicast
ODVA™
Port
Router
Switch
TCP/IP
UDP
Full-Duplex
Printed in the Federal Republic of Germany
09/11/2017
Controller Area Network
(manufacturer independent, open field bus standard)
Common Industrial Protocol, protocol for transmission of real time
data and configuration data.
Dynamic Host Configuration Protocol,
dynamic assignment of an IP address
Domain Name System, Name resolution into an IP address
Electronic-Data-Sheet
Electro Magnetic Compatibility
Interconnect point between two networks
Unidirectional data transmission
Internet Group Management Protocol,
protocol for management of groups
Laser Measuring Device, LE-200 series
Media Access Control Identifier
(node address)
Multi-Point-Connection, the message is sent to a certain group of
subscribers in the network.
Open DeviceNet Vendor Association
(CAN User Organization, especially for DeviceNet, EtherNet/IP™)
Connection,
Part of an address, which allocates data segments to a network
protocol.
Network component to couple several subnets.
Network component to connect several computers or net segments
within a local network, avoid collisions.
Transmission Control Protocol/Internet Protocol
User Datagram Protocol
Bidirectional data transmission
TR - ELE - BA - DGB - 0020 - 08
 TR-Electronic GmbH 2010, All Rights Reserved
Page 93 of 168