Remington iLight Bedienungsanleitung Seite 11

ENGLISH
, Attachment Release Buttons
• Press both buttons and gently pull to remove the attachment.
, CHECK YOUR SKIN TONE
• Consult the skin and hair chart at the front of this manual to ensure your skin is in the suitable range
and your hair colour is susceptible to treatment with i-LIGHT.
• Place the skin of your intended treatment area onto the skin sensor – ensure the skin is touching the
sensor (Fig. 4).
• If your skin is suitable, you will hear a 'beep' and the i-LIGHT will switch on.
• If your skin is unsuitable, you will hear a 'buzz' and the i-LIGHT will remain switched off.
, NOTE: You must use the skin sensor on each body part you wish to treat.
, PREPARE YOUR SKIN FOR TREATMENT
• Ensure the area to be treated is clean and free from oils, deodorants, perfume, make up, lotions and
creams. Shave the hair from the area to be treated, and ensure the skin is clean and dry.
• For facial use, you may prefer to trim the hair. If trimming; the hair must be trimmed to less than
0.5mm.
• Never use wax, epilation, tweezers or other methods that remove the hair from the root as IPL is not
effective if the hair has been pulled out.
Fig. 4
11