Nabo GSI 1210 Gebrauchsanweisung Seite 59

Programme Selection and Operating the Machine
1. Door Handle
Use the door handle to open/close the door of your
machine.
2. Delay and Half load Button
Thanks to the delay function in your machine, by
using the Delay button you can delay the start-up
time of the prog-ramme for 3-6-9 hours. Upon pres-
sing the delay key 3h washing light will be lit. If you
keep on pressing the Delay key , 6h-9h lights will
be lit respec-tively on your each press. You will can -
cel the delay if you press the delay key again after
the 9h light is lit. You will activate the delaying func-
tion once you select the delay time and then press
the Start/Pause key. The count-down will be trigge-
red after that mo-ment. If you would like make any
change in the delay time after the delaying func-tion
is enabled, you can set the new time with the button
number 2 by pressing the Start/Pause key. Press
the Start/Pause key again to activate it.Once the de-
lay time is terminated, the delay light will go oḀ and
the programme you have selected will start opera-
ting.If you press Delay key while the 9h delay light
is on, the delay light will go oḀ. If you press Start/
Pause key while the delay lights are turned oḀ, the
programme you
have selected will start without delay.If the user
switches the programme selection button to oḀ po-
sition after enabling the delay time and the prog-
ramme is started, the activated delay function will
have been cancelled.The half load function will be
activated and the half load LED will be lit if the key
number 2 is pressed and hold for 3 seconds.Press
the key number 2 for 3 seconds to cancel the half
load function. The half load LED will go oḀ. Thanks
to the half load function in your machine, you can
shorten the durati-ons of the programmes that you
have selected and reduce the energy and water
consumption. (see programme listing p 21)
NOTE: If you have used any extra function (such
as delay or half loads) in the washing programme
that you last used and then cut oḀ the energy of the
machine and re-energised it, that func-tion you have
selected will not be acti-ve in the next washing prog-
ramme. If you would like to use this feature in the
programme you have newly selected, you may se-
lect the desired functions once again.
23