Maintenance And Cleaning - Parkside PNKP 105 A1 Originalbetriebsanleitung

Preparing the surfaces to be glued:
♦ Pull the trigger
with your requirements.
1. Apply the glue in spots. For flexible materials, such as textiles,
apply the glue in zigzag lines.
2. Press the two workpieces to be bonded together immediately
after applying the glue and hold for about 30 seconds. The
glued bond is ready after about 5 minutes.
3. During breaks in work, put the glue gun down on the stand
Switching the appliance off:
♦ Unplug the appliance from the mains socket.
The nozzle
140

Maintenance and cleaning

WARNING! ALWAYS REMOVE THE POWER PLUG
FROM THE POWER SOCKET BEFORE CLEANING
THE APPLIANCE.
■ The low-temperature glue gun is maintenance-free.
■ Keep the appliance clean and dry at all times.
■ Never permit liquids to enter inside the appliance. Use a cloth to
clean the housing. Never use petrol, solvents or cleansers which
can damage plastic.
PNKP 105 A1
to regulate the flow of glue in accordance
reaches a temperature of over 140°C.
.
GB 7 ■
│