Ec Declaration Of Conformity - Ikra EGN 2500 Gebrauchsanweisung

12. Technical Data
Model
Nominal voltage
Nominal frequency
Nominal power
No-load speed
Max.branch diameter
Collecting container
Weight
Sound pressure level
Sound power level LWA
Service life S6 40% (full load: 4 min., no-load: 6 min.)
Class of protection II; Degree of protection IP24
Technical and visual changes can be made during the
course of the further development and without prior no-
tice. All information given in these instructions for use are
therefore given without guarantee. Legal claims, which
are based on the instructions for use can therefore not
be made.
13. Warranty
For this tool, the company provides the end user - inde-
pendently from the retailer's obligations resulting from
the purchasing contract - with the following warranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. For commercial use and
use for rent, the warranty period is reduced to 12 months.
Wearing parts and defects caused by the use of no fitting
accessories, repair with parts that are not original parts
of the manufacturer, use of force, strokes and breaking
as well as mischievous overloading of the motor are
excluded from this warranty. Warranty replacement does
15. Troubleshooting
PROBLEM
Motor does not run
The material is not being pulled in
GB | Operating Instructions
EGN 2500
V~ 230-240
HZ 50
W 2500
rpm 4050
mm 40
Liter 50
kg 14,1
dB(A) 95,7 (K=3,0)
(EN 13683/A2:2011)
dB(A) 111
(EN 13683/A2:2011)
CAUSE
Safety lock
Power outage
The material is clogging up in the
feeding funnel.
The shredding material is too soft.
The blade is blocked.
only include defective parts, not complete devices. War-
ranty repair shall exclusively be carried out by authorized
service partners or by the company's customer service.
In the case of any intervention of not authorized person-
nel, the warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.

14. EC Declaration of Conformity

We, ikra GmbH, Schlesier Straße 36, D-64839 Mün-
ster, declare under our sole responsibility that the
product Electric Silent Shredder EGN 2500, to which
this declaration relates correspond to the relevant basic
safety and health requirements of Directives 2006/42/
EC (Machinery Directive), 2014/30/EU (EMC-Guideline),
2011/65/EU (RoHS-Guideline) and 2000/14/EC (noise
directive) incl. modifications. For the relevant implemen-
tation of the safety and health requirements mentioned
in the Directives, the following standards and/or technical
specification(s) have been respected:
EN 60335-1:2012; EN 13683/A1:2009+A2:2011
EN 62233:2008; EN 50581:2012
EN 55014-1/A1:2009/A2:2011; EN 55014-2/A2:2008;
EN 61000-3-2:2006/A2:2009; EN 61000-3-11:2000
measured acoustic capacity level
guaranteed acoustic capacity level
Conformity assessment method to annexe V / Directive
2000/14/EC
The year of manufacture is printed on the nameplate and can be ad-
ditionally retrieved via the consecutive serial number.
Münster, 22.04.2016
Gerhard Knorr, Technical Management Ikra GmbH
Maintenance of technical documentation:
Gerhard Knorr, Kärcherstraße 57, DE-64839 Münster
GB-8
108
111 dB (A)
SOLUTION
Tighten the hand screws well.
Check the power supply cable, the
plug and the fuse.
Shut down the shredder. Pull the
material out of the feeding funnel.
Restart the shredder and insert the
thick branches in such a way that
the blade does immediately catch
in the previous cut.
Put some wood in or shred dried
branches.
Unscrew the hand screw. Open the
shredder and remove the material
causing the clog.
dB (A)