Cleaning, Maintenance And Repair - NovoPress ACO203 Betriebsanleitung

ACO203 / ECO203
EN
Pos : 56 /RVT/Inbetri ebnahme und Betrieb/Ver press en/04- BA beachten ACO102, ACO152, AC O/ECO202, AC O202XL, ECO301, AFP/EF P202 @ 0\mod_1386254189959_18.doc x @ 1665 @ @ 1
Pos : 57 /RVT/Inbetri ebnahme und Betrieb/Ver press en/05b - Punkt 1 +2 AC O/ECO202, AF P/EFP202 @ 0\mod_1386330889477_18.doc x @ 1686 @ @ 1
1. Check whether the nominal width of the press fitting matches the nominal width of the press
jaw/press collar.
2. Comply with the system manufacturer's instructions when fitting the press jaw/press collar
(Fig. 8).
If using a press collar: Fit the adaptor jaw to the press collar as described in the press collar
manufacturer's instructions.
Pos : 58 /RVT/Inbetri ebnahme und Betrieb/Ver press en/07 - Info Pr ess bac ke AC O102, ACO152, AC O/ECO202, AFP/EF P202 @ 0\mod_1386668397015_18.doc x @ 1700 @ @ 1
Pos : 59 /RVT/Inbetri ebnahme und Betrieb/Ver press en/08 - Info Pr esss chling e ACO/EC O202, ACO202XL, EC O301, AF P/EFP202 @ 0\mod_1386668854154_18.doc x @ 1706 @ @ 1
Pos : 60 /RVT/Inbetri ebnahme und Betrieb/Ver press en/09a - Punkt 3 AC O102, AC O152, ACO/ECO202, ACO202XL, AF P/EF P202 @ 0\mod_1386672196372_18.doc x @ 1712 @ @ 1
3. To start the process, press the start button.
Pos : 61 /RVT/Inbetri ebnahme und Betrieb/Ver press en/10b - Punkt 4 AC O/ECO202, AF P/EF P202 @ 0\mod_1386673960873_18.doc x @ 1724 @ @ 1
4. When pressing is complete:
Pos : 62 /RVT/R einigung, Wartung, R eparatur /01b - Vorsic ht - Einsc halter- ACO/EC O202, ECO301, AFP/EF P202, AXI/AAP102 @ 0\mod_1390896253399_18.doc x @ 1780 @ 1 @ 1
9

Cleaning, maintenance and repair

Pos : 63 /RVT/R einigung, Wartung, R eparatur /02 - Ser vic eans chrift - AC O102, AC O152, ACO/EC O202, ACO202XL, EC O301, AC O401, AFP/EF P202, AXI/AAP102 @ 0\mod_1391000010165_18.doc x @ 1790 @ @ 1
Service addresses
Novopress GmbH & Co. KG
Scharnhorststr. 1
41460 Neuss
Germany
You can find the addresses of authorised specialist workshops by contacting Novopress or at
www.novopress.de.
Pos : 65 /RVT/R einigung, Wartung, R eparatur /03b - Informati on Wartung EC O301, AFP/EF P202, AC O/EC O203 @ 0\mod_1391006085087_18.doc x @ 1802 @ @ 1
Service intervals
Service and repair work may only be carried out by Novopress or the authorised Novopress specialist
workshops.
Pos : 66 /RVT/R einigung, Wartung, R eparatur /04a - R egel mäßig 1.ter T eil - ACO102, AC O152, ACO/EC O202, AF P/EFP202 @ 0\mod_1391080694964_18.doc x @ 1820 @ @ 1
Routine inspection (before use, at the start of the working day) and when soiled (Fig. 11)
Check for visible damage, material cracks and other signs of wear. If defects are found, do not use the
device and have it repaired.
Pos : 67 /RVT/Allgemeines /#### Seitenumbr uch #### @ 0\mod_1380200837280_0.doc x @ 885 @ @ 1
Information!
The device will not start if the retaining pin (8) is incorrectly inserted. The green LED
flashes.
Information!
Always comply with the operating instructions for the press tools!
Information!
Make sure that the press jaw is fully closed when pressing is complete (Fig. 9).
Information!
Ensure there is no gap between the segments of the press collar when the pressing
operation is complete.
• If using a press collar: First detach the adaptor jaw from the press collar, then
• Detach the press jaw/press collar from the press fitting (Fig. 10).
CAUTION!
Risk of injury during cleaning or repair work from inadvertently pressing
the On switch.
Therefore:
– Comply with the safety instructions and always remove the battery or disconnect the
mains plug before performing cleaning, maintenance or repair work.
Information!
The next service deadline is indicated on the press device.
This service must be performed at least every 2 years.
18