Troubleshooting - OKAMURA Contessa II Gebrauchsanleitung

Part
Mesh
Covering
Cloth
material
Leather upholstery
Cushion
Seat
material
 Please understand that product specifications might change without prior notification due to improvements made
to the product.
 4 legs with casters/Cantilever leg
Part
Backrest Mesh frame
Seat Inner shell
Plated
Leg frame
Structural
Painted
parts
Frame
Armrest
Pad
Mesh
Covering
material
Cloth
Cushion
Seat
material
 Please understand that product specifications might change without prior notification due to improvements made
to the product.
43
Materials Surface finish
Polyester —
Polyester —
Leather (bull leather) —
Polyurethane form —
Materials Surface finish
Nylon —
Nylon —
Metal (steel) Chrome-plated
Metal (steel) Bake coating (polyester)
Plated Metal (steel) Chrome-plated
Painted Metal (steel) Bake coating (polyester)
Polypropylene —
Polyester —
Polyester —
Polyurethane form —
GB

Troubleshooting

Problem Check
Are you sitting on the seat when
The seat
adjusting the seat height?
cannot be lifted
Is the seat height in its highest
up.
position?
Are you sitting on the front edge of
The seat
the seat?
cannot be
Is the seat height in the lowest
lowered.
position?
The seat slide
Are you sitting on the seat when
lever does not
adjusting the seat depth?
work.
The reclining
tension control Is the backrest locked so that the
dial does not dial does not turn?
turn.
Is the reclining control lever
locked?
Is the reclining tension control dial
set to the strongest (4) position?
Is the backrest
When the
fixed to a
reclining
position other
The backrest
tension control
than at the
does not
dial turns
default position
recline.
(upright) and
is the reclining
tension control
dial fixed in an
When the
intermediate
reclining
position, such
tension control
as between 1
dial does not
and 2?
turn
Solution Page
Adjust the seat height while not
25, 26
seated on the seat.
The seat cannot be lifted up beyond
25, 26
the highest position.
Sit on the center of the seat while
25, 26
adjusting.
The seat cannot be lowered beyond
25, 26
the lowest position.
Adjust the seat depth while not
27, 28
seated on the seat.
Use the reclining control lever to
release the lock so that the backrest 29, 30
moves by leaning against it.
Lift the lever to release the lock, and
29, 30
then lean against the backrest.
Turn the reclining tension control dial
counterclockwise to set the dial at the
1 or 2 position.
Turn the reclining tension control dial
to set it to the 1 position. Hold and
release the reclining control lever, and
strongly lean against the backrest.
Repeat this a few times. When
the backrest returns to the default
position, confirm that the reclining 31-33
tension control dial is set to the 1
position correctly.
Hold and release the reclining control
lever, and strongly lean against the
backrest. Repeat this a few times.
When the backrest returns to the
default position, confirm that the
reclining tension control dial is set to
the 1 position correctly.
44