STEINEL IS 360 D TRIO Information Seite 7

Functions
The system can be put into Two activation options are
operation after connecting provided after detaching the
the motion detector. decorative ring
Switch-off delay
(time setting)
The chosen duration of illumi-
nation of the connected lamp
is infinitely adjustable between
approx. 10 sec. to a maximum
of 15 min. Turning the adjust-
ment screw fully anti-clock-
1
wise selects the shortest
time of approx. 10 sec.,
approx. 10 sec.-
max. of 15 min.
Twilight setting
The motion detector's
response threshold can be
infinitely varied from approx.
2 to 2000 lux. Turning adjust-
ment screw fully anticlockwise
1
selects daylight operation
at adjustment screw 2000 lux.
Turning setscrew fully clock-
6
wise selects night-time
operation at approx. 2 lux.
Reach setting/adjustment
At an assumed mounting This prevents the light from
height of 2.5 m, the maximum being activated unintentional-
reach of the sensor is 12 m. ly, e.g. by cars, passers-by
The detection zone setting etc. and allows you to target
can be optimised to suit danger spots. The shrouds
6
requirements. The shrouds can be divided or cut with a
provided are used for masking pair of scissors along the ver-
out off any number of lens tical and horizontal grooves
segments or to shorten reach
as required.
2
.
turning the adjustment screw
6
fully clockwise the longest
time of approx. 15 min.
(The IS 360 D TRIO is factory-
set to the shortest time.)
The shortest time setting is
recommended for defining the
sensor's detection zone and
performing the walk test.
(The IS 360 D TRIO is factory-
set to daylight operation.)
The adjustment screw must
be turned fully anticlockwise
for defining the sensor's
detection zone and performing
the function test in daylight.
After detaching the decorative
2
ring , clip these in at the top
of the sensor lens. Now push
2
the decorative ring
6
again to hold the shrouds
firmly in place. You can turn
the sensor housing through
6 3
. ± 10° for precision adjust-
ment.
- 12 -
Reach setting/adjustment
3
Reach setting / examples
back on
6
6 2
- 13 - - 13 -