Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance - Bosch MUZ9CC1 Gebrauchsanleitung

Für küchenmaschine mum9
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
7. Press the release button and raise the 
swivel arm with the continuous-feed 
shredder to the stop.
8. Rotate the bowl clockwise, empty and 
remove it.
9. Press the release button and push the 
swivel arm down to the stop.
10. Rotate the continuous-feed shredder 
anticlockwise and remove. 
  ■ Clean all parts directly after use. 
X "Cleaning and maintenance" see
page 11
Removing blockages or build­ups:
  ■ Switch the appliance off, wait until the 
drive has come to a standstill and pull 
out the mains plug.
  ■ Remove the lid of the continuous-feed 
shredder and empty the feed chute.
  ■ To remove any food stuck in the cutting 
grid, remove and clean the dicer insert. 
X "Cleaning and maintenance" see
page 11

Cleaning and maintenance

The attachments and accessories used 
must be thoroughly cleaned after each use.
W Risk of injury
Never grasp the sharp blades or edges of 
the dicer insert. Take hold of the cutter disc 
and cutting grid only by the plastic part! 
Clean with a brush.
Caution!
  – Do not use any cleaning agents 
containing alcohol or spirits.
  – Do not use any sharp, pointed or metal 
objects.
  – Do not use abrasive cloths or cleaning 
agents.
  – Do not wedge plastic parts in the 
dishwasher as they could become 
permanently deformed. 
Cleaning and maintenance
X Image sequence D
1. Rotate the lid of the continuous-feed 
shredder in an anticlockwise direction 
(,) and remove.
2. Fit the blade guard onto the cutter disc.
3. Remove the dicer insert.
4. Press the 4 catches outwards. Remove 
the cutter disc with the blade guard.
5. Push out any remaining pieces of food 
using the cutting grid cleaner.
6. Push the cutting grid out from below 
with the cleaner.
  ■ Clean the blade guard, cutter disc and 
cutting grid with a detergent solution and 
a soft brush.
  ■ Clean the base holder by hand or put in 
the dishwasher.
  ■ Allow all parts to dry.
  ■ Once the individual parts of the dicer 
insert are dry, re-assemble for safe 
storage, making sure you fit the blade 
guard. X "Preparation" see page 10
  ■ Clean the parts of the continuous-feed 
shredder as described in the instructions 
for the MUZ9VL1.
Note: When processing food such as 
carrots, the plastic parts may become 
discoloured, but this can be removed with a 
few drops of cooking oil.
Subject to change without notice.
en
11

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis