Reset; Handset - Everyday Use; Making Calls; External Calls - Silvercrest SGKT 50 A2 Bedienungsanleitung

SilverCrest SGKT 50 A2

Instead of the name of the handset, the de-registered handset display [2] will show
"NOT REGISTER".

RESET

You can reset the base. All settings will be completely erased. Proceed as follows to reset the base:

After confirming by pressing the Menu/OK button [15] the message "RESET?" appears
on the display [17].

Press the Menu/OK button [15] again, the message "PIN-" appears on the display [17].

Enter your PIN code (default 0000) and press the Menu/OK button [15] to confirm. Or
press the ESC button [14] to cancel.

After the base has been reset, a confirmation beep will sound and the "COMPLETED"
message will appear for a few seconds on the display [17].
Please note that a reset erases all saved information (redial, phonebook, calls list and
speed dial numbers) from the base.
If you want to reset the handset and the base, you have to execute this function directly
on the handset.

Handset - Everyday use

Making calls

External calls

Use the numeric buttons [6] to enter a telephone number. After you have entered the phone
number, press the Dial button [11] to call the entered number.
Press the
the
You can press the
the receiver [1] during a call. The current volume level is shown on the display [2].
Only while the current volume level is shown on the display [2] you can press the
button on the multifunction control [4] to increase the volume.
34 - English
button on the multifunction control [4] to clear the entered digit. Keep
button on the multifunction control [4] pressed to clear all entered digits.
button on the multifunction control [4] to adjust the volume of