Lister GEOSTAR G5 Bedienungsanleitung Seite 62

Change gear speed
Gear speed slow
The machine has less feeding force (smaller torque) at the "fast" gear level.
A. Undo countersunk screws (42) with
socket wrench (wrench size 3 mm) and
remove transmission cover (43).
B. Undo cylinder screws (44) with socket
wrench (wrench size 4 mm) and remove
with the washers (45). Pull off spro-
cket wheel, small (46) and sprocket
wheel, large (47) together with chain
(48) from the shafts.
C. Rotate sprocket wheel, large (47) and
sprocket wheel, small (46) with chain
(48) by 180° and slide back onto the
shafts. Mount cylinder screws (44)
with the washers (45) and tighten with
a torque of 6 Nm.
62
Gear speed fast
42
43
46
44
45
47
47
44
45
46
48
48