Herunterladen Inhalt Inhalt Diese Seite drucken

Waste Disposal And Environmental Protection; Spare Parts; Garanty - Grizzly KSG 220 Originalbetriebsanleitung

Elektrisches kettenschärfgerät
Vorschau ausblenden Andere Handbücher für KSG 220:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
2.
To remove the transparent cover
(8), unloose the two fixing bolts with
washers (6).
3.
Unscrew the grinding disc cover (5) by
unloosening the fixing bolt (4).
4.
Insert the lock bolt (23) into the drillhole
(18) on the underside of the housing in
order to lock the spindle.
5.
Unloosen the hex nut (26) and remove
the nut, external flange (27) and grin-
ding disc (7).
6.
Fix the new grinding disc, the cover,
the transparent cover and the grinder
housing in the reverse order.
7.
Adjust the transparent cover (see chap-
ter „Initial start-up").
8.
Trial run: Always carry out a trial run of
at least 30 seconds duration without
load before carrying out your first grin-
ding procedure and after every grinding
disc replacement. Switch the device off
immediately if the disc is not rotating
smoothly, if considerable vibration oc-
curs or if you hear abnormal noises.
Information on replacement:
• Only use grinding discs in perfect wor-
king order. If the grinding disc has been
worn down so much that the transparent
cover can no longer be readjusted, you
will have to replace the grinding disc.
• Never re-drill a locating hole which is too
small to make it larger.
• Never use separate bushings or adapters
in order to make grinding discs whose
hole is too large fit the device.
• Never operate the device without the
transparent cover.
• Always reassemble the device complete-
ly after replacing the grinding disc.
Waste disposal and en-
vironmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines are not to be place with
domestic waste.
Hand over the device at an utilization loca-
tion. The plastic and metal parts employed
can be separated out into pure materials
and recycling can be implemented. Ask
your Service Center about this. Defective
units returned to us will be disposed of for
free.

Spare parts

Refer to the specified Service Address,
Fax No. to purchase spare parts. Orders
must specify the Order number. When or-
dering spare parts list the position number
indicated in the exploded view.
Guarantee
There is a 24-month warranty on this ap-
pliance. This non-transferable warranty
applies to the original purchaser only.
This appliance is not suitable for com-
mercial use. Commercial use will void the
warranty.
This guarantee does not apply to natural
wear, overloading or improper use. Cer-
tain parts are subject to normal wear and
are excluded from the guarantee.This
includes especially: grinding disc and car-
bon brushes in so far as complaints are
not based on material faults.
GB
125

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis