Panel Description - PowerWalker VFI 1000RT LCD Bedienungsanleitung

4. Panel Description

ON Button/
Alarm Silence
Switch Function
Turn on UPS system: By pressing the ON-Button "I" the UPS
ON-Button
system is turned on.
Deactivate acoustic alarm: By pressing this Button an acoustic
alarm can be deactivated in the battery mode. By short touch this
Button all acoustic alarms can be deactivated in all mode.
Do the battery test: By pressing this Button the UPS can do the
battery test in the Line mode or ECO mode or Converter mode.
When mains power is normal, the UPS system switches to No
OFF-Button
output or Bypass mode by pressing OFF-Button " ", and the
inverter is off. At this moment, if Bypass is enabled, then the
output sockets are supplied with voltage via the bypass if the
mains power is available.
Deactivate acoustic alarm: By pressing this Button an acoustic
alarm can be deactivated in the bypass mode.
Release the UPS from fault mode and EPO status.
Select-Button The output voltage, frequency, Bypass disable/enable and
operating mode in No output or Bypass mode, Two Load
segments in output mode, The number of EBM in all mode, could
Enter-Button
be selected by pressing Select-Button, and confirmed by
pressing Enter-Button.
OFF-Button Select-Button Enter-Button
The Display Panel
LCD Screen
17
EN