Time Stamp - Dorr SnapShot Limited 5.0S Bedienungsanleitung

1. Press the arrow button (7)
2. Press the arrow buttons (7)
3. Save with "OK" button (8).
TIMER (START-STOP)
The camera only takes photos/videos within the selected time frame. In the remaining time camera does not take photos/videos
and does not react to motion (same for "Time Lapse" mode).
1. Press the arrow button (7)
2. Press the arrow button (7)
3. To deactivate select "Off" and confi rm with "OK" button (8).
4. To activate select "On" and confirm with "OK" button (8). Display shows two fields to enter the start and stop time:
With the arrow buttons (7)
•
With the arrow button (7)
•
5. After setting save with "OK" button (8). Now the camera only works in the selected time frame.
09 | SYSTEM SETTINGS SYS
DATE AND TIME
The date has to be set in the format dd.mm.yyyy. Time has to be set in 24 hours format.
1. Press the arrow button (7)
2. With the arrow buttons (7)
3. With the arrow button (7)
4. After setting save with "OK" button (8).

TIME STAMP

Choose if time and date are shown on pictures.
1. Press the arrow button (7)
2. Press the arrow buttons (7) or
3. Save with "OK" button (8).
LANGUAGE
Choose either German, English or French language for the camera menu.
1. Press the arrow button (7)
2. Press the arrow buttons (7)
3. Save with "OK" button (8).
BEEP TONE
Activate or deactivate the beep tone for the control buttons.
1. Press the arrow button (7)
2. Press the arrow buttons (7)
3. Save with "OK" button (8).
to select "Time Lapse".
or to select time.
to select "Start-Stop"
or to select "Off" or "On".
or enter the start time.
switch to the "Stop" fi eld. With the arrow buttons (7)
to select "Enter". Press the "OK" button (8) to enter the setting mode:
or enter the date.
switch to the next number.
to select "Time Stamp".
to select "On" or "Off".
to select "Language".
or to select "English", "German" or "French".
to select "Beep".
or to select "Off" or "On".
or
18
enter the stop time.