Note: verify correct polarity.
This is shown inside the battery
compartment.
Replace the battery cover.
Mounting the light
Note: you will need a drill for
installation.
CAUTION! RISK OF INJURY!
Refer to your drill's operating
instructions.
With a pencil mark the location
on the wall where you would like
to install the wall bracket
necessary, use the built-in spirit
level
6
Note: using the level position
the wall bracket so the air bubble
inside the spirit level is centred
between the two markings.
Drill the mounting holes.
CAUTION! Be sure not to
damage lines inside the wall.
12 GB/IE
(see Fig. A).
. If
5