JVC TM-A210G Bedienungsanleitung Seite 11

DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
You can set the following set-up menu items.
• H. POSITION
• WHITE BALANCE
Notes:
÷ Parameter for H. POSITION can be set separately depending on the video input
(Input A (VIDEO) or Input B (VIDEO)) selected by the input select buttons on the front
panel.
Select the required video input with the input select buttons on the front panel in
advance.
÷ WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature
value. Set COLOR TEMP. to 6500 or 9300 on the <MENU> screen beforehand.
1. While pressing the MENU button, press the
CHROMA/PHASE button.
CHROMA MENU
PHASE
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select the desired menu item.
A selection mark (3) is put next to the selected item.
CHROMA CONTRAST
PHASE BRIGHT
3. Press the VOLUME/SELECT buttons to set.
Front panel
button
Notes:
÷ To adjust the white balance, select WHITE BALANCE and
press the VOLUME/SELECT (+) or (–) button to display the
CUT OFF or DRIVE setting screen, then adjust each setting.
÷ Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
• CONTROL LOCK • INPUT REMOTE
• STATUS DISPLAY • ASPECT REMOTE
The <SET-UP MENU> screen is displayed.
* The screen automatically disappears when no operation
is performed after about 5 minutes.
Front panel Function
button displayed
CHROMA/
∞
PHASE
CONTRAST/
5
BRIGHT
Function
displayed
+ Increase (to max. value)
VOLUME/
3
Forward the setting value
SELECT (+)
CUTO Selects CUT OFF setting screen
– Decrease (to min. value)
VOLUME/
2
Reverse the setting value
SELECT (–)
DRV Selects DRIVE setting screen
Contents
3
Forward selection mark ( )
2
Reverse selection mark ( )
Contents
<SET-UP MENU> screen
<Front panel buttons>
1
Selection mark (3): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (5 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
∞
Forward the menu item.
5
Reverse the menu item.
– Lower the adjustment
value. (to the minimum)
+ Raise the adjustment
value. (to the maximum)
3
Forward the setting value.
2
Reverse the setting value.
Exit the <SET-UP MENU>
EXIT
screen. (release)
DRV Selects DRIVE adjustment.
Selects CUT OFF
CUTO
adjustment.
Adjusts red and blue
R·B
signal level.
Adjusts red, green and
RGB
blue signal level.
Turns the ON-SCREEN
display on or off. (This
DISP function is effective only
in the DRIVE or CUT OFF
adjustment mode.)
9