Epson EMP-835 Installationshandbuch Seite 48

3
Check the box for the projector name that you would like to connect, and
then click the "Connect" button.
The projector name is shown in the EasyMP standby screen.
The extended function window will be displayed.
Windows :Click the "Switch LAN" button when you want to change the network to be used.
Macintosh :Click the "Network Set" button when you want to check the computer's network
setting.
Tip :
• When you select a projector that has already connected to another computer, the other
computer is automatically disconnected and your computer's images will be projected.
• If more than one projector with the same ESSID is selected, you can project images
from a single computer to more than one projector. Up to a maximum of four projectors
can be used to simultaneously project the images from a single computer.
• After the projectors have been connected, no additional projectors can be connected.
If using Windows
•
If the automatic ESSID search function is enabled, all of the projectors that can be
used will be detected, but you cannot select and connect to several projectors if they
have different ESSIDs from each other. If you select a single projector, all projectors
with different ESSIDs to the selected projector will appear greyed out. If you select a
greyed-out projector, the projector that was selected before will become unselected and
the new projector will be selected instead.
If using a Macintosh
•
If you want to check the network being used, click the "Extension" button. If you click
the "Network Set" button in the extended function window that is displayed, the
computer's network setting window will be displayed. To change the network setting,
close the EMP NS Connection before changing it.
The connection status is
indicated by the icon's
colour as follows.
Grey : Not connected
Red or : Connecting to
yellow another computer
If using WindowsXP/2000,
the ESSID will appear after
the projector name. If
automatic ESSID search has
been cancelled, the ESSID
will not be displayed.
47