Din Rear-Mount; Installation Using The Screw Holes On The Side Of The Unit - Pioneer DEH-P70BT Installationsanleitung

Installation

DIN Rear-mount

Installation using the screw holes on the side of the unit

1. Remove the frame. (Fig. 7)
2. Fastening the unit to the factory radio mounting bracket.
(Fig. 8) (Fig. 9)
Factory radio mounting bracket
9
To remove the frame, extend top and
Frame
bottom of the frame outwards in
order to unlock it. (When reattaching
the frame, point the side with a
groove downwards and attach it.)
• It becomes easy to remove the
Select a position where the screw holes of the bracket and
the screw holes of the head unit become aligned (are fit-
ted), and tighten the screws at 2 places on each side. Use
either truss screws (5 × 8 mm) or flush surface screws
(5 × 9 mm), depending on the shape of the screw holes in
.
the bracket
10
12
frame if the front panel is released.
Screw
11
13
Dashboard or Console
Fig. 7
Fig. 8
Fig. 9