Controller; Preparation - ACME zoopa q Evo 550 Benutzerhandbuch

Controller features
The controller offers various possibilities to control and modify the zoopa Q Evo 550.
Left rotary switch „Fence"
(Virtual fence)
Left flip switch
Left control stick
Trims
Binding
Control mode 1
Control mode 2
Dual Rate
On/Off switch
Right rotary switch „Camera
Roll"
Right flip switch
Right control stick

Preparation

Only a few steps are required to get the zoopa Q Evo 550 ready to fly.
Prepare sufficient space to work and get the content of the box ready.
You additionally require 4pcs. AA batteries 1.5V
---do not connect the flight battery yet--
1. Landing gear
Turn the zoopa Q Evo 550 upside down and make sure that the motors or GPS tower don't take any damage.
Plug the two landing gears into the model, so that the longer part points towards flight direction.
Use the four 12x2.5 mm screws to mount it. Lead these through the holes and tighten them with the supplied
tools. The middle hole won't be used.
2. Rotors
Prepare the 4 rotors. Their movement directions differ:
2 turning left (CCW)- and 2 turning right (CW).
Matching symbols are placed on the rotors. In addition, 2 rotor nuts have different colors.
Silver nut >fixed turning right
Black nut >fixed turning left
!!The rotors have to be mounted tightly and in the correct way!!!
Perform this step for step.
Assembly from pilot's view
Motor 1: front right – orange rotor with silver cap
Motor 2: front left – orange rotor with black cap
Motor 3: rear left – white rotor with silver cap
Motor 4: rear right – white rotor with black cap
Optimized beginner mode. Limitation of the flight area
0 – Fixed height
1 – Evo Mode
2 – Home lock
Motor speed and vertical axis control
Adjustment of the flight attitude
Binding between model and controller
(already paired at delivery)
Mode 1 gas stick on the right
Mode 2 gas stick on the left (most popular style)
Switch between beginner- (1 beep) and professional mode (2 beeps)
Switches the controller On and Off
Optional Gimbal control
0 – Fixed height
1 – Fixed point
2 – Auto home
Turn and Pan of the model
31