Herunterladen Inhalt Inhalt Diese Seite drucken

Trouble Shooting Chart - Quicke Q 415 Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

TROUBLE SHOOTING CHART

TROUBLE
A
Loader does not hold the load
up when the control is in
NEUTRAL position.
NOTE: There's always a slight
leakage inside the valve.
(Manufacturer's allowance)
B
Loader has inadequate lifting
or crowding capacity.
C
Floating function of the valve
does not work. Deformed
control cable.
D
Loader works slowly or is
standing still.
E
The valve is difficult to operate.
F
Leakage in hydraulic rams.
G
Loader sinks somewhat when
the lifting movement is begun.
H
Exterior leakage at valve
spools.
* Valid only for loaders with
separate control valve.
ENGLISH (114:01)
CAUSE
1
Leaking security valve (in
implement function only).
2
Damaged valve spool (too
much play between spool and
hole in valve housing).
3
Faulty piston seal, see point F.
1
Oil pressure too low
a) Faulty oil pump
b) Faulty relief valve
2
See point A: 1,3
1
The length of the control cable
is not correctly adjusted.
1
Too little oil in hydraulic system.
2
Damaged or incorrectly connec-
ted quick-coupling.
3
Hoses incorrectly connected.
4
Too small oil flow.
1
Control cables jammed
1
Defect seal
2
Damaged piston rod.
3
Damaged top bolt or plunger.
4
Damaged ram barrel.
5
Defect built-in safety valve
(concerns the bucket ram only)
1
Faulty check valve.
1
Defect seal.
114
REMEDY
Check by disconnecting ram
1
hoses from valve.
* Change the valve (just
2
changing seals will not help).
Check the oil pressure
1
a) in front of valve
b) behind valve
* See Valve Mounting
1
Instruction.
Fill up oil according to manu-
1
facturer's instructions.
2
Check the quick-couplings.
Connect in accordance with
3
colour marking.
4
Check the tractor hydraulics.
* Check mounting (sharp
1
angles), grease cables with
thin flowing oil. When ice
forms - put defroster in
adjustment casing at valve.
When replacing seals, first
1
check that the troubles are not
caused by points 2, 3 or 4.
* See Valve Mounting
1
Instruction.
* Remedy in accordance with
1
service instruction for valve.
(Check that return hose to
tank is mounted.)

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis