Reely Phönix Plus Bedienungsanleitung Seite 46

Aileron function
If the control lever for the aileron function is moved to the left, the left wing's aileron must break out to the top and the
aileron of the right wing to the bottom. The rear rudder edge must be deflected or downwards or upwards by approx.
12 mm. In flight, this presses the wing to the lower left and the model flies to the left with a little elevator support.
If the control lever for the aileron function is moved to the right, the left wing's aileron must break out to the bottom and
the aileron of the right wing to the top. The rear rudder edge must be deflected or downwards or upwards by approx.
12 mm. In flight, this presses the wing to the lower right and the model flies to the right with a little elevator support.
Rudder function
If the control stick for the rudder function is moved to the left, the rudder must deflect to the left. The rear rudder edge
must be deflected to the left by approx. 20 mm. In flight, the landing gear is pressed to the right and the model flies
to the left.
If the control stick for the rudder function is moved to the right, the rudder must deflect to the right. The rear rudder
edge must be deflected to the right by approx. 20 mm. In flight, the landing gear is pressed to the left and the model
flies to the right.
46
Figure 12
Figure 13
Figure 14
Figure 15