Something Not Working - AEG Electrolux lavatherm t 35640 Gebrauchsanweisung

125987680 ENGLISH.qxp

Something not working?

Something not working?
If a problem occurs, you can try to solve it yourself following the
instructions below. If you call out an engineer when one of the follo-
wing problems occurs, or to repair a fault due to incorrect use, the call-
out will be charged even if requested within the guarantee period.
ó
Problem
The drier is not working
properly
The drying results
are not satisfactory
22
2007-05-18 07:51 Page 22
Possible cause
Mains plug disconnected
The "START/PAUZE-DEP./ PAUSE" but-
ton has not been depressed.
No programme selected
Loading door open
Fuse or residual current circuit
breaker in fuse box (domestic
installation) faulty
Wrong programme selected
Lint filter blocked
Wrong filling quantity
Laundry not sufficiently dried
Deposit on the drum inner surface-
or on the drum ribs
Remedy
Plug in mains plug
press "START/PAUZE-DEP./ PAUSE"
button
Select programme
Close loading door
Check fuse or residual current circuit
breaker. Faults can be eliminated by
an electrical engineer
Select another (time) programme for
the next drying cycle
Clean lint filter
Observe recommended filling quantity
Pre-dry laundry sufficiently
Clean drum inner surface and drum
ribs