Sound Controls; Equalizer; P.bass Control; Bass/Treble Control - Pioneer X-HM31V-K Bedienungsanleitung

04 Getting started

Sound controls

Equalizer

When the EQUALIZER is pressed, the current mode setting
will be displayed. To change to a different mode, press the
EQUALIZER repeatedly until the desired sound mode
appears.
FLAT
ACTIVE
DIALOGUE
NIGHT

P.BASS control

Each time the P.BASS button on the remote control is
pressed, the bass frequency mode will change.
Note
• P.BASS control is initially set to OFF.

Bass/treble control

Press the BASS/TREBLE, then press
bass or treble.
Note
• The EQUALIZER and P.BASS cannot operate
simultaneously. The most recently selected of these two
functions will be the one used.
• BASS/TREBLE can operate alongside either the
EQUALIZER or P.BASS.
When one of the above two functions is
selected, the function that is not selected
will be displayed as follows.
1 When P.BASS setting (ON/OFF) is changed
• EQUALIZER : FLAT
2 When EQUALIZER setting (ON/OFF) is
changed
• P.BASS : OFF
16
En
A flat and basic sound.
A powerful sound that
emphasizes low and high tones.
A sound that allows the radio or
vocals to be heard more easily.
A sound that can be enjoyed
at night even with lower volume.
/ to adjust the

Setting the wake-up timer

Used to change the existing timer setting, or to set a new
timer.
1 Press STANDBY/ON to turn the power on.
2 Press and hold CLOCK/TIMER.
3 Press to select "ONCE" or "DAILY",
then press ENTER.
ONCE – Works once only at a preset time.
DAILY – Works at the preset time on a preset day.
4 Press to select "TIMER SET", then
press ENTER.
5 Press to select the timer playback
source, then press ENTER.
• DVD/CD, FM, USB/
iPod
selected as the playback source.
6 Press to select the timer day, then
press ENTER.
7 Press to set the hour, then press
ENTER.
8 Press to set the minute, then press
ENTER.
• Set the time to finish as in steps 7 and 8 above.
9 Adjust the volume press
press ENTER.
10 Press STANDBY/ON to enter the power
standby mode.
• The TIMER indicator lights up.
, AUDIO IN and LINE can be
, then
VOLUME +/–