Initial Settings Menu; Using The Initial Settings Menu; Video Output Settings; Language Settings - Pioneer XV-DV232 Bedienungsanleitung

06

Initial Settings menu

Chapter 6
Initial Settings menu

Using the Initial Settings menu

The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.

Video Output settings

Setting
TV Screen
(See also Screen sizes
and disc formats on
page 33.)
AV Connector Out
(See Using the SCART
AV output on page 25.)

Language settings

Setting
Audio Language
Note
1 • In the table, the default setting is shown in bold: other settings are shown in italics.
• Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often
these settings can also be made from the DVD disc menu.
• The AV Connector Out setting only needs to be set if you have connected this player to your TV using a SCART cable.
20
En
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
Video
S-Video
RGB
Option
English
Languages as displayed
Other Language
1 Press HOME MENU and select 'Initial
Settings'.
2 Use the cursor buttons and ENTER to
select the setting and option you want to set.
All the settings and options are explained on
the following pages.
What it means
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
Set if you have a widescreen TV.
Standard video, compatible with all TVs.
Higher quality, but check your TV for compatibility.
Best quality, but check your TV for compatibility.
What it means
If there is an English soundtrack on the disc, it is played.
If there is a language selected on the disc, it is played.
Select to choose a language other than the ones displayed (see
Using the language code list on page 36).
Initial Settings
1