Yamaha BD-S1900 Bedienungsanleitung Seite 39

– The Ethernet connection speeds can be set when you
select "Yes", then press ENTER.
– As automatic detection is made (factory preset
mode), this setting is not normally necessary. If a
situation occurs in which the Ethernet connection
fails, etc., change the setting and confirm if the
Ethernet connection successfully works.
When the connection speed is set, select "Next",
then press ENTER.
Option
Ethernet Connection Speeds
Auto-Detection
10M Half Duplex
100M Half Duplex
C For testing the connection to the internet, after
confirming the settings, press
then press ENTER.
Confirm the current setting.
: xxx xxx xxx xxx
IP Address
Netmask : xxx xxx xxx xxx
Gateway : xxx xxx xxx xxx
DNS Address : xxx xxx xxx xxx
xxx xxx xxx xxx
MAC Address : xx:xx:xx:xx:xx:xx
Test
– As a result of the test, if the internet connection fails,
enter the setup values manually.
D Press
/ to select "Complete", then press
ENTER.
The operation procedure for inputting
characters manually
Note
– Numeric characters such as IP address can be
entered on the input screen either by selecting each
of the characters in the "Numeric" mode or using the
Number buttons on the remote control.
IP Address 123
Netmask
Gateway
1 Press ENTER at the boxes in which characters are to
be entered, and the input screen will appear.
Numeric
Edit
1 2 3 4 5 6 7 8 9 0
/
Selected by pressing
2 Press
/ to select the desired input mode.
– When inputting the address of the proxy server;
"1ABC" (Alphabet/numeric character) / "Sign" /
"Edit"
10M Full Duplex
100M Full Duplex
Next
/ to select "Test",
Complete
/
Selected by pressing
– When inputting other values (IP address, etc.);
"Numeric" / "Edit"
3 Press
/ to select a number/character, then press
ENTER.
4 Repeat step 3 to display all of the desired characters/
numbers in the input field.
Example: The screen for inputting numeric characters
123
Numeric
Edit
1 2 3 4 5 6 7 8 9 0
Note
– Press RETURN (Del.Char.) to delete a number/
character you have input.
To change a number/character you have input, press
B (Left) or C (Right) to select the number/character
you want to change, and press RETURN
(Del.Char.). Then, press
number/character you want to input, and press
ENTER.
5 Press D (Complete) to fix the numbers which have
been input.
IP Address 123
Netmask
Gateway
6 Repeat step 1 to 5 to finish inputting all the required
characters.
Settings
4
/ to select a new
35
En