no fire sources (e.g. burning candles) are placed on or near the device;
no foreign objects penetrate the device;
the watch winder is not subjected to any extreme temperature fluctuations, as this could result in
condensation and electrical short circuits. If the device was subjected to extreme temperature
fluctuations, however, wait (approx. 2 hours) until it has reached ambient temperature before
use;
the watch winder is never subjected to excessive shocks and vibrations.
Storage when not in use
If you will not be using the watch winder for a prolonged period, disconnect it from the mains and
remove the batteries. Ensure that the storage temperature remains between -10°C and +50°C. The
humidity should not exceed 85% rel. air humidity.
Copyright
All information contained in these instructions is subject to copyright and is provided for information
purposes only. It is only permitted to copy or duplicate data and information with the express and
written consent of the author. This also includes commercial use of the content and data. The text
and illustrations are based on the state of the art at the time of printing. Subject to change without
notice.
Description of the controls
These operating instructions have a fold-out cover. The Auriol watch winder AUB 2 A1 is illustrated
with numbers on the inside cover. The numbers indicate the following:
1
Lock mechanism
2
Cover (with integrated viewing window)
3
Rotation speed selector
4
Rotary table
5
Watch cushion
6
Cuff
7
Battery compartment (at the bottom)
8
Watch compartment
9
Storage cushion
10
Power supply jack (polarity:
11
On/off switch
12
Rotation direction selector
)
Watch winder AUB 2 A1
English - 25