Functional Description - Bosch GSH 5 CE Professional Originalbetriebsanleitung

OBJ_BUCH-419-006.book Page 15 Tuesday, July 13, 2010 3:36 PM
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for chiselling work in
concrete, brick, masonry and asphalt as well as
for driving in and compacting, when using the
respective accessories.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Dust protection cap
2 Locking sleeve
3 Chisel adjustment ring (Vario-Lock)
4 Vibration damper
5 Handle (insulated gripping surface)
6 On/Off switch
7 Thumbwheel for preselection of impact rate
8 Service indicator
9 Stand-by indicator
10 Auxiliary handle (insulated gripping surface)
11 Knurled nut for auxiliary handle
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools
Technical Data
Demolition Hammer
Article number
Rated power input
Impact rate min
Impact energy per
stroke according to
EPTA-Procedure
05/2009
Chisel positions
Tool holder
Lubrication
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured sound values determined according
to 2000/14/EC.
Typically the A-weighted noise levels of the
product are: Sound pressure level 86 dB(A);
sound power level 97 dB(A). Uncertainty
K=3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Chiselling: Vibration emission value a
2
Uncertainty K=1.5 m/s .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
1 609 929 W81 | (13.7.10)
English | 15
GSH 5 CE
Professional
3 611 C21 0..
W 1150
-1
1300– 2900
J 8.3
12
SDS-max
Central
permanent
lubrication
kg 6.2
/II
2
=8 m/s ,
h