that the appliance won't move or turn over.
NEVER place the power supply cord near heat sources such as cookers, heatings or ovens.
NEVER place the appliance near curtains, wall decoration, clothing, towels or other
inflammable objects.
NEVER move the fryer as long as the oil or frying fat is hot.
The oil must be completely cooled off before folding in the handle or disassembling the fryer.
NEVER pull the power cord, but only the plug.
ALWAYS place the appliance near a power point and connect it directly. ALWAYS complete
unroll the power cord. NEVER use extension cords or sockets.
NEVER turn the power cord around the deep fryer, NEVER bend it or squeeze it. NEVER let
the cord hang over the edge of the table or the counter.
NEVER use accessories or spare parts from other appliances or brands.
Repairs may only be done by a recognized repairer or service center.
2. BEFORE FIRST USE
Remove all packaging and stickers.
Keep all packing material out of reach of children.
Check that there is no damage to the deep fryer or the power cord. If there is any damage, do
NOT use the deep fryer and return it to the sales point.
Before using the deep fryer for the first time, clean the bowl and the basket (see point 4.3).
Disassemble the deep fryer in this order: basket – control panel with heating element – bowl.
Clean the bowl and the basket
Assemble the deep fryer in this order: bowl – control panel with heating element – basket.
Always put the bowl in the housing in such a way that the suspension hook (10) is at the front
of the deep fryer.
Check if the sliders (4) fit precisely in the grooves (2) made for that purpose (backside panel).
Ensure that the voltage marked on the rating-plate is the same as your main voltage.
3. USE OF THE FRYTASTIC FRYER
3.1 The first use
3.1.1. Use of frying oil
1. Remove the lid and the basket
2. Fill the deep fryer with oil between the MIN and MAX inside the bowl (17).
Caution: NEVER switch on/warm up the deep fryer WITHOUT oil or with UNSUFICIENT
oil. If you do so, the deep fryer may get damaged permanently. NEVER leave water in the
stainless steel bowl when filling it with oil or fat. The oil must always be between MIN and
MAX, otherwise the safety thermostat switches off. Only use oil suitable for frying/for high
temperature.
3. Then follow the instructions from 3.2 point 1.
3.1.2. Use of solid fat
With this program the frying fat is melted as per special electronic procedure, determined in
advance, in a safe and controlled way.
23