Device Description; Getting Started; Operation - Beurer Janosch JBY 52 Gebrauchsanweisung

5

device description

overview
1 Lifter
2 Lid
3 Mains cable
4 MIN/MAX display
5 Control panel
6 Power LED
7 Heat LED
8 Time/Temperature display
9 Button for setting time and/
or temperature
10 On/Off button
11 Rapid heat-up button
6

Getting started

1. Before use, ensure that the device and accessories (including mains cable) do not have any
visible damage.
2. Place the device on a firm, even surface.
3. Connect the mains plug to the socket. The power LED lights up. The device is ready for use.
7

operation

Warming up baby food/drinks and keeping them warm:
1. Place the lifter in the baby food warmer and place the bottle or jar in the lifter.
2. Fill the container with sufficient water depending on the size of the jar. Ensure that the water
does not overflow.
Starting the warming process:
1. Press button
The warming time that is currently set now flashes on the display. On first use, the default
setting of 15 minutes is displayed. If the device remains plugged in after the first use, it
shows the last entered warming time when subsequently used.
2. Enter the warming time (3 - 18 minutes). To do so, press the
have reached the desired warming time. The time is entered in minute increments; after "18",
the display begins again at "3".
The warming time is dependent on the initial temperature, the type and quantity of
food/drink, the container material (glass/plastic) and the temperature of the water
used to fill the device. The following table offers a guide to selecting the warming time
for food/drinks to be warmed to 37°C.
100 ml milk/chilled
250 ml milk/chilled
190 g puréed food/room temperature
followed by the rapid heat-up button
1
2
3
8
9
10
11
.
Duration
~ 8 min.
~ 14 min.
~ 8 min.
4
button repeatedly until you
5
6
7
11