Use As Hot Air Gun; Use As Blowing Torch(Figure F) - Parkside PT360 Betriebsanleitung

Use as hot air gun

The hot air gun function is ideal for removing or drying paint and forming plastic. It can also
be used for shrink fitting and softening or removing adhesive.
CAUTION! Danger of burns! Allow the gas soldering iron
to cool completely before changing the attachments.
• Detach the soldering tip from the hot air/soldering attachment
• The soldering gun can now be used as a hot air gun
Hot air deflector (Fig. E)
The hot air deflector can be used with the hot air attachment.
CAUTION! Danger of burns! Never touch the heated
hot air deflector Allow the gas soldering iron to cool
completely before changing the attachments.
• Push the hot air deflector firmly on the hot air attachment. The mounted hot air deflector
can now be turned as required.

Use as blowing torch(Figure F)

Assembly
• Loosen the knurled nut (3)
• Remove the hot air/soldering attachment from the torch
• Fix the blow torch attachment with the help of the knurled nut on the device
• The device can now be used as a blow torch
11