Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance - EuroLite PML-80 COB Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Decimal Hexad. Percentage S/F
0 5
00 05
0% 2%
6 55
06 37
2% 22%
56 105 38 69
22% 41%
106 155 6A 9B 42% 61%
156 205 9C CD 61% 80%
206 255 CE FF 81% 100%

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
The objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
light-output very quickly.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
Control-channel 8 - Dimmer speed (step response)
S
Control Board setting dimmer speed (nodE)
Response characteristics of LEDs
S
Response characteristics of halogen lamps, fast
S
Response characteristics of halogen lamps, less fast
S
Response characteristics of halogen lamps, middle
S
S
Response characteristics of halogen lamps, slow
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Feature
CAUTION!
31/32
00096817.DOC, Version 1.0

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rgb 80w spotRgb 80w wash

Inhaltsverzeichnis