Inspection And Maintenance Plan - Gude Big Wheeler ST 560 T Originalbetriebsanleitung

ENGLISH
40

Inspection and maintenance plan

Regular servicing period
Engine oil Inspection
(10W-40)
Change
Air fi lter Inspection
Change
Spark plug Inspection
Clean
Change
Provide appropriate servicing upon the earlier of the following: in the given month or after the specifi ed hours of
operation have expired.
Defects searching
Defect
The motor does not start
Grass is not collected
Before After 1
any start- month
up
5
Hours of
operation



Cause
Start-Stop lever has not been pressed
Primary pump has not been used
Lack of fuel
Bowden cables are too long
Wrong fuel, storing without petrol tank
being drained
Sooted spark plug (carbon residues on
electrodes), electrodes distance too big
The spark plug is wet from petrol
(oversaturated engine).
Blocked channel
Full collection bag
Too wet grass
After 3 After 6 After 12
months months months
25 Hours 50 Hours 100 Hours
of opera- of opera- of opera-
tion tion


Press the Start-Stop lever
Use the primary pump
Add some fuel
Adjust the Bowden cables using the
coupling nut.
Drain the fuel tank and carburettor.
Add fresh petrol.
Clean the spark plug, check the plug ther-
mal value, possibly change the plug, set
the electrodes distance to 0.6-0.7 mm
Dry the spark plug out and refi t it.
Clean the ejection channel
Empty the collection bag
Cut in dry weather
After 24
months
250 Hours
of opera-
tion tion

