Residual Heat Indicator; Operating The Appliance; Switching The Appliance On And Off; Setting The Heat Setting - AEG Electrolux 79231KF-N Benutzerhandbuch

6

Operating the appliance

6 Automatic warm-up indicator
If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance
switches itself off.
Displays
/
-

Residual heat indicator

The residual heat indicator lights up, as soon as one cooking zone is hot.
WARNING!
Risk of burns from residual heat! After you switch the appliance off, the cooking zones
need some time to cool down. Look at the residual heat indicator.
Use residual heat for melting and keeping food warm.
Operating the appliance

Switching the appliance on and off

Switch on
Switch off
After switching on, within approx. 10 seconds a heat setting or a function must be set,
otherwise the appliance automatically switches itself off.

Setting the heat setting

To set the heat
setting
Switch off
Display
Keep Warm settings
Heat settings
Automatic Warm-up
Fault
Residual heat
Child safety device
Automatic Switch off
Control panel
Touch for 1 second
Touch for 1 second
Control panel
Touch the desired heat setting, if necessary, correct
up or down
Touch
Description
The cooking zone is switched off
Keep Warm / STOP+GO function is switched on
To set heat settings
The Automatic Warm-up function is switched on
Malfunction has occurred
Cooking zone is still hot
Lock/Child safety device is set
Switch off is active
Display
/
/ none
Pilot light
lights up.
goes out.
Display
/ to