Automatic Shut-Off; Electromagnetic Fields (Emf); Preparing For Use - Philips Cafe Gaia HD7546 Bedienungsanleitung

Caution
- Do not place the appliance on a hot surface and prevent the mains
cord from coming into contact with hot surfaces.
- Unplug the appliance before you clean it and if problems occur
during brewing.
- Do not disassemble the insulated jug.
- Never immerse the insulated jug in water or any other liquid, as this
could cause water to enter between the walls of the jug.
- When the jug is filled with coffee, keep it in upright position to
prevent leakage.
- During brewing, the lower part of the appliance and the bottom of
the insulated jug become hot.
- This appliance is intended to be used in household and similar
applications such as farm houses, bed and breakfast type
environments, staff kitchen areas in shops, offices and other working
environments and by clients in hotels, motels and other residential
type environments.

Automatic shut-off

For your convenience and for extra safety, this appliance is equipped with an automatic shut-off
function. When you put the plug in the wall socket for the first time, it is possible that the appliance
and the power-on light go on. In this case, the appliance switches off automatically within
approximately 30 seconds.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to
electromagnetic fields

Preparing for use

1 Put the appliance on a flat and stable surface.
2 Put the plug in an earthed wall socket.
It is possible that the appliance is switched on (light goes on) when you put the plug in the wall
socket. If this is the case, the appliance switches off automatically after approximately 30 seconds
(light goes out).
Note: Make sure the on/off switch at the back of the appliance is switched on.
- You can store excess cord by pushing it into the opening at the back of the coffee maker (Fig. 2).
Flushing the appliance
1 Fill the water tank half full with water and put the jug in place. (Fig. 3)
2 Press the power-on button to switch on the appliance. The light goes on. Let the appliance
operate until the water tank is completely empty (Fig. 4).
The appliance switches off automatically after flushing.
,
3 Let the appliance cool down for at least 3 minutes before you start brewing coffee.
4222_200_0690_1_DFU-booklet_A5_v1.indd 7
ENGLISH
7
19/11/15 12:29