urmet domus 1092/275H Bedienungsanleitung Seite 24

when images are lit by neon lights or coloured lights),
set according to the image brightness), or
AUTO VALUE IS SUGGESTED.
AGC – AUTOMATIC GAIN CONTROL
This function is used when the camera is looking at images under low brightness conditions. The values
can vary from 0 to 8.
SENS-UP
This function allows to select a camera electronic exposure value.
poor light conditions. When the brightness gradually decreases, also the frame per second is reduced
(number of images/second), increasing the minicamera sensitivity. Select SENS-UP to choose among
various exposure types from 2x to 30x.
This function is available if the SHUTTER is set to AUTO or with a value of 1/25.
BRIGHTNESS
Values can vary from 1 to 100.
D-WDR – DIGITAL WIDE DYNAMIC RANGE
The function D-WDR is the digital version of WDR (Wide Dynamic Range). This allows a better balance of
brightness of light and dark areas to obtain a more detailed image. Selecting and pressing the ON button to
access the following submenu:
LEVEL
RETURN
Selecting LEVEL and moving to left or right you can reduce the differences in brightness between light and
dark areas.
DEFOG
This function allows you to increase image contrast in order to improve its visibility in blurry conditions. For
example the fog reduces the visibility. Enable this filter to limit this condition. The contrast balance alters
also the saturation, the profile and the threshold for detecting the subject movement.
If you select AUTO and press the button, you can configure filter position and size, change the shade by
using values 0 to 2 or reset the previous values.
An object with a strong light in the background usually appears dark and not so visible if compared with the
rest of image. The BACKLIGHT function allows to solve this problem and obtain a good compensation in
the selected area (defined by position and dimension) increasing the brightness if the area appears dark or
reducing it if too clear.
Selecting this menu item you can choose among the options OFF (not active), BLC and HSBLC.
BLC is accessed by selecting the following submenu:
LEVEL
AREA
DEFAULT
RETURN
24
values between 1/25 and 1/50000 or x2 and x30.
D-WDR
■■█■■■■■■2
RET
BACKLIGHT - BACK LIGHT COMPENSATION
BLC
MIDDLE
RET
AUTO (the shutter speed will be automatically
It allows to shoot scenes under
DS1092-221A