Height Adjustment - Grammer MAXIMO EVOLUTION ACTIVE Bedienungsanleitung

Seat functions and operation
26

Height adjustment

Pull or push the lever for height adjustment to
move the seat upwards or downwards.
The height adjustment can be adjusted
continuously.
Release the lever when the desired height
position is reached.
The adjustment process should
be carried out after automatic
weight adjustment is completed
and must be finished prior to
driving.
During the height adjustment process,
the driver must sit still on the seat.
The duration of the adjustment process might
vary.
In case of permanent operation of the height
adjustment handle, the adjustment process
will be interrupted automatically after 20
seconds.
To continue the adjustment process, pull or
push the height adjustment lever again.
By operating the height adjustment lever, the
automatic weight adjustment is interrupted.
While driving, it is not possible to adjust the
height of the seat.
Note:
The running time of the compressor is limited
to 2.5 minutes.
Before activating the compressor again
automatically, there will be a break of 5
minutes.
GB