ZANKER ZKH 7629 Bedienungsanleitung Seite 27

4. To confirm the desired pyrolytic cleaning
function, press the button
Pyro stops flashing and the symbol
will disappear, the acoustic signal will stop, the
oven lamp will switch off and the pyrolytic
cleaning cycle starts (Fig. 21).
As soon as the temperature in the oven
increases, the thermometer symbol
increases slowly, indicating that the
temperature inside the oven is increasing.
5. After some time the door lock will be activated
and the respective symbol
displayed (Fig. 22). Now the button
no longer active.
After ending the pyrolytic cleaning process,
the display shows the time of day. The oven
door is still locked.
Once the oven has cooled down, an acoustic
signal will be emitted, the symbol
disappear and the door will unlock.
To stop the pyrolytic cleaning cycle at any
time; press the button
NOTE: The time indication includes the
cooling down time. If you select a cooking
function while the pyrolytic function is
active, the cleaning cycle will be
interrupted.
If the oven door lock is activated, it is
impossible to select any cooking function
until the door lock is off.
Wait until the door lock is off to use the
oven.
To programme the pyrolytic cleaning
cycle (delayed start, automatic stop)
If you desire, you can programme the
starting and ending time of the pyrolytic cleaning
cycle.
1. Use the button
Press the button
. The display
will be
will
.
to switch on the oven.
as often as necessary,
is
Electrolux
Fig. 21
Fig. 22
27