Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
18
Select and start a washing programme
– The indicator of the phase in operation is on.
The opening of the appliance door stops the countdown. When you close the door, the
countdown continues from the point of interruption.
Cancelling the delay start
The countdown is not operating
1. Press the Delay touchpad again and again until:
• The display shows the time of the washing programme
• The phase indicators come on.
2. Press the Start touchpad to start the washing programme.
The countdown is operating
1. Press the Delay touchpad again and again until:
• The display shows the time of the washing programme.
• The phase indicators come on.
• The washing programme starts automatically.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point of interruption.
Cancelling the washing programme
If the washing programme has not started, you can change the selection.
To change the selection while the washing programme operates, it is necessary to cancel
the programme.
• Press and hold the Delay touchpad and the Start touchpad at the same time until:
– All the programme indicators come on.
– The display shows two horizontal status bars.
Make sure that there is detergent in the detergent dispenser before you start a new wash-
ing programme.
End of the washing programme
When the washing programme is completed, the display shows a zero and the end indi-
cator is on.
1. Deactivate the appliance.
2. Open the appliance door.
3. For better drying results, keep the appliance door ajar for some minutes.
Remove the items from the baskets
• Let the dishes become cold before you remove them from the appliance. Hot dishes
can be easily damaged.
Werbung
Kapitel
Inhaltsverzeichnis
