Changing The Setup Key - G&D DL-MUX2-DP1.2-MC2 Bedienungsanleitung

Changing the setup key

The hotkey to call the setup mode consists of at least one hotkey modifier (see
Changing the hotkey on page 19) and an additional setup key, which can be selected
from a given range of keys.
Both the hotkey modifier (
How to change the current setup key:
1. Press
Hotkey+Backspace
If the hotkey delay is activated, press the key combination during the adjusted time
(default: 7 seconds).
2. Press the setup key
3. Press the setup key to be activated.
The following keys are provided: Backspace, PrtScr, Scroll, Num, Pause, Insert,
Delete, Home, End, PgUp, PgDn and Space.
1. Use the tree view to click on
2. Right-click the KVM switch and click on the
text menu.
3. Click the General
4. Use the field
The following keys are provided: Backspace, PrtScr, Scroll, Num, Pause, Insert,
Delete, Home, End, PgUp, PgDn and Space.
5. Click to save your changes.
OK
Ctrl ) and the setup key (
(default:
Ctrl
.
S
KVM switches > [All switches]
tab.
to select the desired key.
Setup key
Backspace ) can be changed.
+ ) to activate the setup mode.
Backspace
.
Configuration
G&D DL-MUX2-DP1.2-MC2 · 21
Configuration
entry in the con-