Branch Saw - Zipper Maschinen ZI-GPS40V-AKKU Betriebsanleitung

Install / remove battery:
Insert the battery into the slots and slide into place until
the battery locks into place.
To remove the battery press the battery lock button and
slide out the battery.
Verify that the machine is switched of before inserting the battery!
Do not use force when inserting the battery! If the cartridge does not slide

12.1.3 Branch saw

Assembly without pole:
Unlock lock lever (A).
Insert the operation handle (B) to the slots and slide into
place until the operating handle locks into place.
Lock with lock lever (A)
Assembly with pole:
Operation handle:
Unlock lock lever (B).
Insert the operation handle (A) to the slots and slide into
place until the operating handle locks into place.
Lock with lock lever (B)
Assembly with pole:
Saw:
Unlock lock lever (A).
Insert the pole (B) to the slots and slide into place until the
operating handle locks into place.
Lock with lock lever (A)
Remove the operating handle:
Unlock lock lever (A).
Slide out the operating handle (B).
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-GPS40V-AKKU
W A R N I N G
easily, it is not being inserted correctly!
ASSEMBLY
38